Currie Enterprise Rockjock 60 Housing, 5X5.5 1/2" Studs, 68.750" Wms, Detroit Locker, 5.38 Ratio,

Currie 60 Front Crate Axle Assembly (Detroit Locker - 5.38) - CE-KF6301D53 from 4 Wheel Parts
Best price
{{TABTIT2}}

Just $8,199.00

on Thu 28-May-2020

at 4 Wheel Parts

{{PRICE2}}

on {{WHEN2}}

at {{SHOP2}}

Currie Enterprise Rockjock 60 Housing, 5X5.5 1/2" Studs, 68.750" Wms, Detroit Locker, 5.38 Ratio,

Currie 60 Front Crate Axle Assembly (Detroit Locker - 5.38) - CE-KF6301D53

The Currie 60 high pinion front axle is built to the legendary Currie Standard with a long list of exclusive standard features and innovation that make it the clear choice for serious off-road adventure. Built around the Currie high clearance radius bottom center section, the Currie 60 is designed to slide over obstacles with ease and with its thick reinforced center section, forged knuckles, large diameter tubes and full 35 spline axles, the Currie 60 deliver superior strength for years of dependable service. The Currie high-pinion radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings. Highest measured ground clearance of any 60 class axle on the market (including the integrated skid plate), guess the other guys have trouble reading a tape measure. Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates. High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminate oil starvation issues. Upper control arm mounts feature rebuildable Johnny Joints for improved suspension articulation. Available with: Detroit, ARB, or Eaton Lockers. 5x5.5 bolt pattern with 1/2 inch studs;68.750 inch WMS;Detroit Locker - 5.38 ratio;35-spline (1.5 inch diameter) 4340 chromoly inner and outer axle shafts;1350 u-joint;Standard reverse cut Dana 60 gear set;Large diameter front pinion bearing matched to rear bearing;Stage-1 nodular iron high-pinion radius bottom center section with thicker walls and webbing;High volume flow-thru recirculating oil system;Differential cover: Nodular-iron with integrated Johnny Joint control arm mount, Red;3 inch diameter, .375 wall DOM axle tubes;Heavy duty forged 1-ton inner and outer knuckles with high steer steering arm;JK tone rings installed for ABS and ESP retention;Warn Premium 35-spline locking hubs;13.250 inch vented rotors with zinc plated caliper brackets;Heavy gauge 3/16 inch steel mounting brackets;Control arm mounts: Johnny Joints installed with 1/2 inch greasable bolt;Complete front axle assembly, reusing only the stock JK calipers;High quality and heavy duty components and brackets used throughout;Recommended maximum 37-inch tire size;California Residents: WARNING

Currie Enterprise Rockjock 60 Housing, 5X5.5 1/2" Studs, 68.750" Wms, Detroit Locker, 5.38 Ratio,

The Rockjock 60 Crate Axle Is A Complete Front Axle Assembly, Reusing Only The Stock Jk Calipers From The Vehicle. Built To The Legendary Currie Standard With Exclusive Features Including: Rockjock High-Pinion Radius Bottom Center Section Greatly Improves Obstacle Slide-Over By Presenting A Smooth Curve Rather Than The Sharp Edge Found On Other 60 Housings Highest Measured Ground Clearance Of Any 60 Class Axle On The Market (Including The Integrated Skid Plate), Guess The Other Guys Have Trouble Reading A Tape Measure Integrated Ar400 Hardened Steel Skid Plate Resists Deformation And Gouging To Slide Over Obstacles Far Better Than Iron Housings Or Mild Steel Plates High Volume Flow-Thru Recirculating Oil System Keeps Pinion Bearings Bathed In Cool Oil, Reducing Operating Temperatures And Eliminate Oil Starvation Issues Upper Control Arm Mounts Feature Rebuildable Johnny Joints For Improved Suspension Articulation Currie Performance Full 35-Spline (1.5 Inch) 4340 Chromoly Inner And Outer Axles Shafts For Superior End-To-End Strength (Offered As An Additional Cost Option From The Competition) High Quality And Heavy Duty Components And Brackets Used Throughout. | Currie Enterprise Rockjock 60 Housing, 5X5.5 1/2" Studs, 68.750" Wms, Detroit Locker, 5.38 Ratio,
Share to FaceBookShare to TwitterShare to MessengerShare to WhatsAppShare to RedditShare to TumblrShare to PinterestShare to PocketShare to EMailShare to Skype
Follow @dealsnapnet
Latest deals in Parts & Accessories:
 
CLOSE