QSC PLX3102 Professional Power Amplifier Standard

Qsc Plx3102 Professional Power Amplifier from zZounds
Save 16%!
Elsewhere

Just $969.95

on Tue 22-Sep-2020

at zZounds

Just $1,159.99

on Tue 22-Sep-2020

at Musician's Friend

QSC PLX3102 Professional Power Amplifier Standard

Qsc Plx3102 Professional Power Amplifier

The PLX3102 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3102 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.Stereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohmsBridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohmsStereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohmsBridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohmsVery lightweight (21 lbs.)Advanced cooling design with front exhaustPower, clip, -10dB, and signal present LEDsFront-panel gain controlsBalanced XLR inputs with TRS connectorsPowerLight power supplyClip limitingThermal limitingSpeakon NL4 and binding post outputs100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossoverSwitchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damageSwitchable/defeatable clip limiters

QSC PLX3102 Lightweight Power Amp 1000 Watts

The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems.

QSC PLX3102 Professional Power Amplifier Standard

The PLX3102 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status.

The PLX3102 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability.

Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides.

PowerLight Technology
PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean.

Audio Quality
PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.

Stereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohms
Bridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohms Stereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohms
Bridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohms
Very lightweight (21 lbs.)
Advanced cooling design with front exhaust
Power, clip, -10dB, and signal present LEDs
Front-panel gain controls
Balanced XLR inputs with TRS connectors
PowerLight power supply
Clip limiting
Thermal limiting
Speakon NL4 and binding post outputs
100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover
Switchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damage
Switchable/defeatable clip limiters

#standard #power
Share to FaceBookShare to TwitterShare to MessengerShare to WhatsAppShare to RedditShare to TumblrShare to PinterestShare to PocketShare to EMailShare to Skype
Follow @dealsnapnet
Latest deals in Music:
 
CLOSE